Interior painting requires as careful preparation of surfaces as does exterior painting. The advent of odorless paints now makes it possible to paint any time of the year. Formerly, most interior painting in the home was done in the fall or spring, when it was possible to leave the windows open to ventilate the room. But open windows brought dust into the room to mar the finished painted surface.
A good interior paint job is often 50% preparation and 50% painting. Do not rush in preparing the surfaces in your eagerness to get at the brush or roller. If you do not prepare the surfaces properly, you'll be back with the paint brush or roller in a few months.
In this section you will find the necessary information on the application of different types of paints on various interior wall, ceiling and floor materials.
New dry plaster in good condition, which is to be finished with a paint other than water paint, should be given a coat of primer-sealer and allowed to dry thoroughly before being inspected for uniformity of appearance. Variations in gloss and color differences in the case of tinted primers indicate whether or not the whole surface has been completely sealed. If not, a second coat of primer-sealer should be applied. If only a few 'suction spots' are apparent, a second coat over these areas may be sufficient.
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.
Before applying water paints of the calcimine type to new plastered walls they should be sized, using either a glue-water size or, if the plaster is dry, a thin varnish or primer-sealer.
Cold water paints of the casein type may be applied either directly to a plastered surface, or the surface may be first given a coat of primer-sealer to equalize uneven suction effects. The same is true of resin-emulsion paints, with the recommendations of the manufacturer of the product being given preference in case of doubt. Since resin-emulsion paints usually contain some oil in the binder, they should ordinarily be applied only to plaster which has dried thoroughly.
Texture wall paints may also be used on plaster surfaces. The advantages of this type of paint are that one coat economically produces a textured decoration and relieves the monotony of smooth flat paint. It also covers cracks or patches in the plaster more completely than ordinary wall paint. The disadvantages of texture wall paint are that they Collect dust and are difficult to restore to a smooth finish. These materials are available as water-or oil-based paints, are thicker than ordinary wall paints, and may be applied to wallboard as well as plaster to produce textured effects such as random, Spanish, mission, and multicolored.